Solution Description

Yellow Color Joong Ang Coupling, Ms Coupling, PU Coupling, Polyurethane CZPT for Vessel Coupling

 

Description: the polyurethane elastomeric is a new content of polymer artificial amongst rubber and plastic. It has the two substantial sCZPT of plastic and high elasticity of rubber. Its traits are: 1, a extensive selection of hardness. It still has rubber elongation and resilience at higher hardness. The polyurethane elastomeric has a hardness selection of Shore A10-D80. 2. substantial strength. At rubber hardness, the tensile energy, tear sCZPT and load carrying capability are significantly higher than general rubber substance. At large hardness, its effect sCZPT and flexural sCZPT are significantly increased than plastic material. 3, put on-resistant. Its wear resistance is very exceptional, normally in the selection of .01-.10cm^three/1.61km, about 3-5 occasions than rubber content. 4, oil resistant. The polyurethane elastomeric is a very polar polymer compound which has minimal affinity with non-polar mineral oil and is rarely eroded in gas oil and mechanical oil. 5, great resistance to oxygen and ozone. 6, excellent vibration absorption functionality, can do damping and buffering. In the mold production market, it replaces rubber and springs.7, has excellent reduced temperature functionality. 8, radiation resistance. Polyurethane is highly resistant to substantial strength radiation and has satisfactory functionality at 10-ten deg radiation dose. 9, with excellent machining performance.

 

The polyurethane coupling, rubber coupling are created by injection with higher top quality TPU content or mould CSM/SBR. It is creating and special for all types of metal shaft coupling with extremely excellent overall performance of higher tensile power, high put on resistant, high elastic resilience, drinking water resistant, oil resistant and outstanding tiredness resilience, high affect resistant etc. We have total sets injection moulds and source full assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J series couplings etc. with high quality and superb expertise. Implement to all sorts of industrial metal shaft coupling.

 

Requirements:

material: TPU, CSM/SBR, NBR, nylon and many others.

color: yellow, pink, purple, green, black, beige and so on.

surface: sleek

tensile strength: 8-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: 1.25g/cm³

elasticity influence: >25%

tear energy: 35-155KN/m

akron abrasion reduction:<0.05cm^three/1.61km

compression established (22h*70°C):<10%

working temperature: 120°C

standard dimension for polyurethane coupling: 

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS5, GS7, GS9, GS12, GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS550, GS65, GS75

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/one hundred, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 571, 571, 2035, 2035A, 3545, 4560, 6070, 7080

MS571, MS571, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

 

normal size for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-ten, NOR-MEX214-ten, NOR-MEX240-10, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160 

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #2, #3, #4, #5, #6, #eight

GR42, GR48, GR55, GR65, GR75

DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11

 

regular dimensions for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in baggage, cartons, pallets or crates

OEM & customized size are agreed

particular provide all sorts of metal coupling for FCL, NM, MH, HRC, Enjoy Joy, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls confirm sort, dimension quantity and amount***

 

The roller chain coupling consists of two radial sprocket hubs that mesh with a double pitch roller chain. Chain couplings are employed for low to medium torque and pace purposes. The meshing of the sprocket and chain transmits torque, and the linked engage in accommodates angular, parallel and axial misalignment.